The Use Of Hydraulic Vane Pump : What Matters - Buick Encore Forums - EncoreOwners.com
 
LinkBack Thread Tools
post #1 of 1 (permalink) Old 07-27-2020, 02:44 AM Thread Starter
Junior Member
 
Join Date: May 2020
Posts: 6
The Use Of Hydraulic Vane Pump : What Matters

1. Installation

The installation of the hydraulic vane pump must avoid using belts, chains, gears to directly drive the hydraulic vane pump. It is recommended to drive the hydraulic vane pump with a coaxial direct motor, and use a flexible connection or a spline connection; when connected to the motor, the hydraulic vane pump shaft and the motor shaft must be between 0.05 For coaxial lines within the tolerance range of mm, a rotary flexible coupling with clearance error compensation and angle error compensation should be used. In order to avoid damage to bearings, oil seals, etc., noise, vibration or even accidents due to the misalignment of the two.

2. Turn

The standard hydraulic vane pump should rotate clockwise when viewed from its shaft end, otherwise it is regarded as a reverse hydraulic vane pump, and the forward rotation hydraulic vane pump will not be oiled when it rotates in a counterclockwise direction.

3. Start

When the hydraulic vane pump is first started, the trapped air must be removed from the system. Generally, you can loosen the oil outlet pipe joint of the hydraulic vane pump to exhaust, or use the exhaust valve to exhaust. For low-flow hydraulic vane pumps with poor self-priming, the hydraulic vane pump must be filled with oil through the drain or inlet pipe before starting the hydraulic vane pump. In a short period of time, the rapid opening and stopping of the hydraulic hydraulic vane pump can also make the hydraulic vane pump fill and exhaust quickly. The overflow valve must be fully opened when starting, that is, the system is started under no pressure, and the motor rotation direction is checked.


4. Filtration requirements

In order to ensure the working reliability of the hydraulic vane pump, the oil should be filtered with full flow to make the oil cleanliness in accordance with IS04406 standard 19/15 or cleaner hydraulic oil (such as 16/13), the suction line is recommended to use 150 mesh Suction oil filter, oil return pipe 25~10 industry filter.

5. Hydraulic oil

Generally, hydraulic vane pumps use anti-wear hydraulic oil with a viscosity of 25 to 68 cst. The temperature difference between the hydraulic vane pump body and the oil is controlled within 20 ℃, and the oil temperature should not be higher than 60 ℃. Different hydraulic oils have different working oil temperatures.

6. Pump speed

Please refer to the regulations of the operating instructions of the hydraulic vane pump. Generally, the speed range of the hydraulic vane pump is 600~1800r/min.


Zhejiang Yongling Hydraulic Machine Co , Ltd . is a professional manufacturer and supplier of Hydraulic Vane Pumps and V/Vq Series Vane Pumps . Our products are widely used in cutting, plastics, forging, engineering, leather, pressure, metallurgy, agriculture, transportation machinery and machine tools, hydraulic stations, automatic production lines and other fields. We have obtained the ISO9001 international quality management system certification. Our products have won a good reputation in China for their stable and reliable quality, and have been used in the 2010 Asian Games Torch Tower. Our products occupy most of the domestic market and are exported to Southeast Asia, Russia, Africa and other foreign markets. More hydraulic vane pump products are at https://www.china-vanepump.com/
Cassidyvanepump is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Buick Encore Forums - EncoreOwners.com forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome